Single swing seamless moulded fiber glass door :

Single swing sterile doors offer seamless molded fiber glass door panels that are non porous, non shedding, and non absorptive. Our seamless panels withstand finger prints, fading and corroding, even when using harsh chemicals .  Our all inclusive program, we can engineer a complete interlock/access control system, packaged with the doors and hardware to ensure flawless installation and start-up.


  • 1-3/4″ structural seamless molded fiberglass panel with polyester gel-coat finish.
  • Tightest seal-3 sided and bottom sweep gasket on each door panel.
  • CGMP, FDA and EMEA compliant.
  • Complete turnkey system.
  • State ofthe art interlocking system.
  • Electro mechanical operator, microprocessor controlled in a 120 volt, single phase, with mechanical spring close.

Panel Construction

  • 1-3/4” thick structural seamless molded fiberglass panel with polyester gel-coat finish is non-porous, non-shedding, and non-absorptive.
  • High-density closed cell poured-in-place polyurethane foam core.
  • All hardware locations reinforced with internal steel backing plates.
  • 20 ga. stainless steel edge capping for added protection and durability.
  • White color standard. (Other colors available on request.)

Frame Construction

  • 16 ga., 304 #4 stainless steel fully welded and polished (through frame faces and throat.)
  • Available in either single or double rabbet construction.
  • Prepped for a wide variety of hardware options.

Performance Features

  • Power operation utilizing an electro mechanical operator, microprocessor controlled in 120 volts, single phase, with mechanical spring close.
  • Operator completely enclosed within a 16 ga. 304 #4 stainless steel sloped shroud.
  • Overhead presence sensor to provide threshold and swing side obstruction detection.
  • Push plate to open; time delay to close.
  • In case of power failure, door can be opened manually at any time.


  • Vision panel with standard sloped frame.
  • Flush vision panel.
  • All stainless steel construction available in 316L.
  • 14 ga. stainless steel frames.
  • Stainless steel clad panel. [Fire rated and non fire rated].
  • Custom color
  • Custom designed interlocking system.
  • Hospital stops 4” or 6”.
  • Stainless steel closer cover.
  • Can provide any major lines and grades of architectural hardware.

Power Model Options

  • Touch less wall mounted activation switch.
  • Actuators: Variety of activation devices available upon request.


  • One year limited warranty on all components.
Coyright © 2019 — All rights reserved.